Instruction Manual

Configuration and Characterization 7-11
7.8 Conveyor Configuration
To configure the conveyor:
1. Click on
Configure > Conveyor Settings from the ECXP Edit Screen.
! The Conveyor Settings dialog box shown in
Figure 7-9 opens.
" NOTE The Conveyor Settings dialog box also contains Inverter configuration settings. See
7.9 Inverter Configuration.
2. Enter the desired property values.
! See
Table 7-1 for a description and default value for each property.
3. Click
OK when done.
Figure 7-9 Conveyor Settings Dialog Box