Instruction Manual

Configuration and Characterization 7-1
7 Configuration and Characterization
7.1 Overview
Your dispensing system is configured at the Asymtek factory prior to shipping. However, if any
components have been changed or moved, it may be necessary to reconfigure them. This section contains
the following procedures:
•
Tool Configuration • Inverter Configuration
•
Characterization • Robot Configuration
•
Fan Width Configuration • Bar Code Scanner Configuration
•
Fixture Configuration • Reconfigure
•
Conveyor Configuration
7.2 Safety First
Before configuring any of the dispensing system components, please review the information presented in
Section 2 - Safety.
CAUTION! The procedures in this section should only be performed by a trained service
technician.
7.3 Record Keeping
At a minimum, the following information should be recorded in the dispensing system maintenance
records:
• Procedure Type
• Date
• Technician Name(s)
• Post-procedure Functional Test Results