Instruction Manual

6-34 Operation
6.13 Production Statistics
6.13.1 Database Utility
The ECXP Database Utility lets you export production data to ASCII text tables. The tables can then be
imported into database or spreadsheet programs for further analysis. By default, ten days of data are
stored in the database.
" NOTE Old data is purged when ECXP starts. If the database files become very large, database
maintenance can delay ECXP startup.
The following tables may be exported:
• Fan Width Control: Pressure and Width
• Flowmeter: Volumes dispensed.
• Production: Cycle Times
To export production data:
1. Click on
Utilities > Database > Export Table in ASCII format.
2. Click on the desired table in the lower window of the dialog box.
! To select more than one table, hold down the [Shift] key while clicking on the
additional tables.
3. Click on
OK.
! The Save As dialog box appears.
4. Select a destination for the table to be exported and give it a unique filename.
5. Click on
OK to export the table.
! If you selected more than one table, the Save As dialog box will reappear after the first
table has been saved. You will be prompted to select a destination and enter a filename
for the next table.