Instruction Manual

Operation 6-33

6.12.2 Edit Screen

To run a program from the Edit Screen:

1. Load the program you want to run as described under

6.11 Loading a Program.

! If you have the C-740 Conveyorized System, a new product (board or carrier) is

requested from the upstream machine, loaded into the fixture, and coated.

! If you have the C-741 Batch System, load a new product (board or carrier) into

the fixture.

2. Start the run in one of the following ways:

! Press the

[F9] key

! From the menu bar, click on

Run > Run

! Click the

Run button on the toolbar.

" NOTE When running your program from the Edit Screen, you have the option to click the

Step button instead of the Run button to step through the loaded program.

Each click on the button performs one instruction. You may also click on

Pause

Stop anytime during program execution.

Figure 6-16 Running a Program - Edit Screen