Instruction Manual

Operation 6-29
6.11 Loading a Program
Programs can be loaded from both the ECXP Operator Screen (Figure 6-12) and the ECXP Edit Screen
(Figure 6-13). Following are detailed instructions on loading a program from both screens.
To load a program from the Operator Screen:
1. If a program is currently running, click on the
Stop button.
! Production stops after the currently loaded product is coated.
2. Click on the
Change Product button or double-click the Current Product field
(Figure 6-12).
! The product map opens. The product map is a tree structure of the folders and subfolders
where the programs are stored.
- Click on a plus sign (+) to expand a group and view the product programs in that group.
- Click on a minus sign (-) to collapse a group.
3. Click on the desired program to select it. When selected, it is highlighted in blue.
4. Click on the
OK button to load the selected program.
" NOTE Click on the Cancel button to exit the product map without loading a program.
Figure 6-12 Loading a Program - Operator Screen