Instruction Manual

Operation 6-25
6.9.2.3 Extended shutdown
If the system will be shut down for several days, or if your coating material has a short pot life, follow the
procedures outlined in the appropriate fluid dispensing applicator manual for cleaning and maintenance of
the fluid applicator and nozzle.
6.9.2.4 Service Shutdown
To shut down for service:
1. Wait for the dispensing program to complete.
2. Verify that all motion has stopped.
3. Press the
Stop (0) button on the Control Panel.
4. Unload all boards from the conveyor.
5. Exit ECXP.
6. Exit Windows XP.
7. Turn OFF
(0) the main power circuit breaker at the rear of the system.
8. Disconnect the main power cable and lock it in a locked box for safety.
9. Disconnect the facility air supply hose from the main air inlet and place a warning tag on the
main air inlet.