Instruction Manual

6-16 Operation
Table 6-4 System Status Controls
Button/Indicator Function
CONVEYOR
STATUS
RESET
V
PAUSE
CONVEYOR
STATUS
RESET
VV
PAUSE
CONVEYOR STATUS has two buttons.
PAUSE halts the Conveyor. The PAUSE LED lights up to indicate that
the Conveyor has been paused. Press PAUSE again to resume
Conveyor movement.
Press RESET to clear the Conveyor Controller after a fault condition
has occurred.
INTERLOCK
INTERLOCK
RECOVERY
The Interlock is a key-activated safety feature that prevents the
Conveyor and the Dispensing Head from moving while the dispensing
system Front Doors are open.
The Interlock should always be ON during normal operation. This helps
prevent personal injury or damage to the dispensing system.
For more information on the Interlock feature, see 2.10 Integrated
Safety Systems.
SYSTEM
STATUS
RESET
SYSTEM
STATUS
RESET
SYSTEM STATUS LEDs are color coded for each System Status
condition. The LED lights correspond with the colored lights on the
Light Beacon. For an explanation of the different status conditions, see
Table 2-3.
If the red ABORT LED has been triggered, press the SYSTEM
STATUS RESET after the condition that triggered it has been
corrected. This will reset the dispensing system electronics.
" NOTE After you press the SYSTEM STATUS RESET
button, you must press the FIND HOME button
to re-establish motor references.