Instruction Manual

Operation 6-13
Refer to Table 6-2 through Table 6-4 for a description of the Control Panel buttons for each of the
functional areas.
Table 6-2 Download Program Controls
Button/Indicator Function
ABORT
ABORT halts a production run. After you press the ABORT button,
its red LED lights to indicate that the currently loaded program is
discontinued.
After a program is aborted you must press RESET and then FIND
HOME before you can restart the program.
VVV
PAUSE
PAUSE temporarily stops a production run. When its yellow LED
indicator is ON, the system is paused. You can pause a production
run at any time.
To resume dispensing, press PAUSE again. When the LED
indicator turns OFF, the system resumes dispensing.
9
8
7
6
5
3
2
1
4
0
START
PROGRAM
9
8
7
6
5
3
2
1
4
0
9
8
7
6
5
3
2
1
4
0
START
PROGRAM
Program selection lets you program the dispensing system and
download a pre-programmed set of instructions.
" NOTE This feature is not used with ECXP.