Instruction Manual

Operation 6-11
Table 6-1 Power Buttons and Switches
Button/Switch Appearance Function
EMO Button
Located at the right end of the Control Panel, the
large, red Emergency Machine OFF (EMO) button
cuts electricity to the Power Manager and stops all
system motion.
Pressing the EMO vents all pressure in the pneumatic
system, de-energizes the robot motors, and cuts
power to all system components except the Computer
and Monitor.
System START/STOP
Buttons
I
The Start and Stop buttons are located on the Control
Panel and control power to major system components.
The Start (I) button glows green when pushed and
continues to glow until the Stop (0) button or
Emergency Machine OFF (EMO) button is pressed.
" NOTE During power-up, there is a 60 second
delay to allow the dispensing system
to vent properly.
Main Power Circuit
Breaker
I
0
The Main Power Circuit Breaker, located on the left
rear panel of the dispensing system, controls power
supplied to the Power Manager, which supplies power
to the entire system. The I position is ON, and the 0
position is OFF.
WARNING! To cut power to the entire system, you must turn OFF (0) the Main Power Circuit
Breaker.