Manual

4-24 Operation
Gauges and Regulators
The C-730 Flux has five types of gauges and regulators:
• Main Air
• Fluid
• Valve
• Coaxial Air
• Conveyor
WARNING! To reach inside the Century Series system front doors or through the
light curtain, you must fully understand the related Safety Interlock and
DISPENSER STATUS indicators (see Table 4-6 and Table 4-8).
The fluid and valve regulator controls are black knobs extending down from the roof of the
dispensing area. To reach them you must open the front doors or reach through the light
curtain (if installed) where they are located just behind the front hood (see Figure 2-1:
Front View or Figure 2-2: Dispensing Area). The Main Air and conveyor regulator
controls are located at the rear of the system (see Figure 4-10). See detailed adjustment
instructions following descriptions of the gauge and the regulator.