Manual

4-12 Operation

(Continued)

Table 4-4 Motion Control Functions

Button/Indicator Function

CONVYR

ROBOT

ENABLE

X/Y-Axis controls (left/right, front/rear) and Conveyor belt

controls.

Press ROBOT ENABLE to control the X/Y motion of the

dispensing head:

§ The left and right arrows move the dispensing

head to the left or right (X-Axis)

§ The up and down arrows move the dispensing

head to the rear and front of the dispensing area

(Y-Axis)

§ Click and release a single arrow to move

dispense head 1mm (0.001 inches)

§ Click and hold a single arrow to move the

dispensing head at 25.4 mm/sec (1 in/sec)

§ Click and hold a double arrow to move the

dispensing head at 50-75 mm/sec (2-3 in/sec)

Press CONVYR ENABLE to control forward and reverse

motion of the conveyor belt. The up and down arrows are

non-functional for conveyors with a manual conveyor

width crank.

(Continued next page)