Manual

Safety 3-3
Safety Warning Labels
WARNING! CAUTION! Follow all safety warning labels. Failure to comply could cause
serious bodily harm to the user and serious damage to the
dispensing system.
To ensure the safety of all personnel, always observe standard safety precautions and
practices. Before using your dispensing system, take a moment to familiarize yourself with
the system safety features and warning labels.
Table 3-1 shows the four types of warning labels on the dispensing system. Figure 3-1
shows the location of the warning labels on a typical C-718SMT. Depending on your
particular configuration, some label locations can vary.
Table 3-1 Safety Warning Labels
Symbol Type Hazard
Mechanical
Mechanical warning labels identify features that
require special attention. Keep hands away from
moving parts. Disconnect and lockout power before
servicing.
Can cause serious bodily harm to the user.
Electrical
Electrical warning labels identify high voltage
components. Use extreme caution when working in or
around these areas. Disconnect and lockout power
before servicing.
Can cause severe injury or death.
Thermal
Thermal warning labels identify potentially hot
components and surfaces. Use extreme caution
when working on or around these areas.
Can cause severe burns.
Fire
Fire warning labels identify fuse requirements. For
protection against risk of fire, replace fuse with same
type and current rating.
Can cause fire or severe damage to the equipment.