User guide

Height Sensor 10-7
Height Sensor Configuration
In FmNT, you can:
• Choose various Height Sense Modes.
• Control Z-velocity and acceleration of the Dispensing Head during a height sense.
• Control maximum search depth that the Dispensing Head will descend in search of the substrate.
• Control retract distance after a height sense.
To configure the HS-Series Height Sensor in FmNT:
1. In the Main Window, click on
Configuration.
2. Select
Setup Height Sensor from the Configuration Menu.
> The Height Sensor Configuration dialog box opens (below).
Figure 10-4 Height Sensor Configuration Dialog Box (FmNT)