User guide

8-4 System Specifications

*Y camera offset used here is just an example. The offset for your system will depend on which

dispensing valve is used.

Item Description

1 Rear Conveyor Belt (at extreme rear position)

2 *Valve 1 Camera Offset = 50 mm (2.0 in)

3 Valve 2 Camera Offset = 50 mm (2.0 in)

4 Vision Area = 439 x 351 mm (17.3 x 13.8 in)

5 Vision and NO Dispensing in this Area

6 Front Conveyor Rail

7 X Camera Offset, Valve 1 = 57 mm (2.25 in)

8 X Camera Offset, Valve 2 = 104 mm (4.1 in)

9 Dispensing and NO Vision in these Areas

10 Valve 2 Dispensing Area = 439 x 325 mm (17.3 x 12.8 in)

11 Valve 1 Dispensing Area = 439 x 325 mm (17.3 x 12.8 in)

12 Dual-Action Working Envelope, Dispensing and Vision = 284 x 325

mm (11.2 x 12.8 in)

Figure 8-2 Vision and Dispensing Areas, Dual-Action Pump

NOTE Space between rails varies from 25 to 394 mm (1 to 15.5 in).