User guide

8-2 System Specifications
Computer and User Interface
Computer Pentium-based PC
Software Fluidmove for Windows NT (FmNT)
Options Ethernet interface network card
SECSII/GEM interface
Automatic Vision
Resolution
0.013 mm (0.0005 in)
Display Video overlay and picture in monitor
Lighting Options* Asymtek’s Pattern Recognition System and Fluidmove for Windows
NT software provide a proprietary corner finder algorithm and
computer control of lighting levels for each fiducial
Available:
• LED (light-emitting diode) light ring
• NER DOAL (Diffuse On-Axis Light)
*Asymtek will help you choose the most effective light source for your specific application.
Facilities Requirements
System Footprint
1105 x 1524 mm (43.5 x 60 in.) maximum with keyboard extended
Power Requirements 208/240 VAC
50/60 Hz, 30A single phase
Air Pressure 690 kPa, 6.9 Bar, 425 liters/min (100 psi, 15 SCFM) maximum with
impingement heaters ON
Noise <70 dBA
Average Shipping Weight 544 kg (1200 lbs)
Average Machine Weight 386 kg (850 lbs)
Configuration Options*
Fluid Delivery Systems
Choice of Linear Pump or rotary positive displacement pump
matched to the dispensing application
Multiple Valve Support Supports two valves for either simultaneous high-speed dispensing,
or for two different viscosity fluids for applications such as dam & fill
Needle Heater
Ambient to 100 degrees C with ±3 °C accuracy Resolution 1 °C
Low Fluid Alarm Senses and alarms when fluid level approaches a pre-set threshold
Low Pressure Alarm Senses and alarms when input air pressure drops below a pre-set
value
Process Development Hot Plate Converts the system to batch mode for process development with
contact heat. Dimensions: 203 x 315 mm (8.0 x 12.4 in)
Material Handling Upstream and downstream stand-alone magazine loader/unloaders
*Additional options are available. Contact Asymtek for more information.