User guide

7-6 Maintenance
Recommended Purge Boot Size and Needle Compatibility
See Table 7-3 below to select the purge boot and needle size for your dispensing requirements.
Table 7-3 Purge Boot Colors, Sizes and Compatible Needles
Purge Boot Color Inside Diameter Compatible Needle
Gauges
Asymtek P/N
Orange 0.5 mm (0.020 in) 26, 27, 30, 32 01-0019-00
Pink 0.8 mm (0.031 in) 22, 23, 24, 25 01-0021-00
Green 1.1 mm (0.045 in) 19, 20, 21 01-0018-00
*Olive 3.0 mm (0.120 in) 14, 15, 16, 18 01-0022-00
*Recommended size for nozzles
To replace the purge cup:
1. Remove the Purge Station lid (Figure 7-3).
2. Remove the plastic cup inside and discard it.
3. Place a new plastic cup inside of the Purge Station.
4. Replace the Purge Station lid.
Item Description
1 Purge Station Lid
2 Plastic Cup
3 Cutout Showing Inside of Purge Station
Figure 7-3 Replacing Purge Station Cups
1
2
3