User guide

4-4 Operation
Dispenser Operation
There are several operation controls and indicators for the dispensing system components. This section
explains the general operational use of these controls.
Computer System
The computer is located inside the lower cabinet. The CD-ROM drive, disk drive, power switch, and
reset button are located on the faceplate of the computer. Access to connections in the rear of the
computer should be limited to service technicians.
The computer runs Fluidmove for Windows NT (FmNT). Dispensing programs for your applications are
stored on the computer hard drive. Consult the Fluidmove for Windows NT User Guide for information
on installation and use of FmNT.
Specifications for Computer System
Typically, the computer is configured as follows:
Minimum 32 MB RAM
Hard drive
1.44 MB 3.5-inch disk drive
CD-ROM drive
Two serial ports
VGA video card
Light ring control card
Vision processing card