User guide

3-12 Safety
Electrical Power
Electrical Power is supplied to the dispensing system through the Main Power Inlet. The Main Power
Cable connects the facility AC power source to the Main Power Inlet located on the rear of the Century
Series system (Figure 3-5).
WARNING! CAUTION!
Lock out power when performing service or maintenance work on the
dispensing system, be sure to lock out power (see “Locking Out Power” on
page 3-13). Failure to do so could cause serious bodily harm to the user
and/or serious damage to the dispensing system.
To turn the Main Power ON (I) or OFF (0), use the Main Power Circuit Breaker located at the rear of the
Century Series system (Figure 3-5). Turning the Main Power Circuit Breaker OFF cuts power to all
components.
?
NOTE Main Power Circuit Breaker can be used for safety shutdown when operator is
positioned behind the system and unable to reach the EMO.
Item Description
1 Main Power Circuit Breaker
2 Main Power Inlet
Figure 3-5 Main Power Inlet and Main Power Circuit Breaker
1
2