User guide

Safety 3-7
To recover after an Emergency Shutdown:
NOTE If the Main Circuit Breaker has been tripped, you will need to switch it back ON (I) and
execute standard startup procedure (see the Startup/Shutdown section).
1. Turn the EMO button counterclockwise until it pops back into position.
2. Clear the Conveyor of all boards and parts.
3. Remedy the cause of the emergency shutdown.
4. Press the green START button on the Control Panel.
5. Press
Find Home on the Control Panel.
> FmNT will display a prompt asking if you want to reinitialize or abort the program.
6. Restart the dispensing program that was running when the emergency stop occurred. Refer to the
Startup/Shutdown section of this manual.