User guide

Safety 3-3
Safety Warning Labels
WARNING! CAUTION!
Follow all safety warning labels. Failure to comply could cause serious
bodily harm to the user and serious damage to the dispensing system.
To ensure the safety of all personnel, always observe standard safety precautions and practices. Before
using your dispensing system, take a moment to familiarize yourself with the system safety features and
warning labels.
Table 3-1 shows the four types of warning labels used on the dispensing system. Figure 3-1 and Figure
3-2 show the location of the warning labels on a typical C-721. Label locations may vary with your
system configuration.
Table 3-1 Safety Warning Labels
Symbol Hazard
Mechanical
Warning
This label identifies a mechanical component that requires special
attention. Keep hands away from moving parts. Disconnect and
lock out power before servicing.
Can cause serious bodily harm to the user.
Electrical
Warning
This label identifies a high-voltage component. Use extreme
caution when working in or around these areas. Disconnect and
lock out power before servicing.
Can cause severe injury or death.
Thermal
Warning
This label identifies a potentially hot component or surface. Use
extreme caution when working on or around these areas.
Can cause severe burns.
Fire
Warning
This label identifies a fuse requirement. For protection against risk
of fire, replace a fuse only with one of the same type and current
rating.
Can cause fire or severe damage to the equipment.