User guide

Index-4
vision system, 8-2, 9-4
standard components, 2-1
startup, 5-1–5-6
Statistical Process Control (SPC), 8-1
stop pin, 2-7, 4-1, 14-5
syringe, 2-7
syringe disposal, 3-1
T
tactile sensor, 11-3. See needle sensor
tactile sensor troubleshooting, 11-3
temperature controller, 4- and 8-channel, 15-4
temperature controller, 4- and 8-channel, 2-7, 12-4
thermal management. See heaters, part
timers, heat station, 2-6, 4-4
tooling. See heaters, part
troubleshooting
conveyor, 14-5
height sensor, 10-16
needle heater, 12-7
needle sensor, 6-3, 11-5
part heaters, 15-8, 15-10, 15-11
software, 6-1
system, 6-2
tactile sensor, 11-3
vision system, 9-2
U
underfill, of flip chips, 2-1
V
valve offsets, 5-4
valve ON/OFF, 2-7
valves
air pressure, 2-7, 4-18, 4-21, 13-5
ON/OFF, 4-18
other types, 10-2
pneumatic fittings, 4-18
reset, 4-14
reverse speed, 4-14
speed, 4-14, 13-5
status, 4-14
toggle speed, 13-6
ventilation duct, 2-10
vision system, 2-7, 8-2, 9-1
dispensing area, 8-3
light source options, 2-7
operation, 9-2
pattern recognition system, 9-1
specifications, 9-4
troubleshooting, 9-2
W
warning labels
electrical hazard, 3-3
fire hazard, 3-3
interlock, safety, 3-9
mechanical hazard, 3-3
thermal hazard, 3-3
water trap, 2-10, 7-3
weigh station, 5-3, 5-4
weight, system, 8-2
X
xyz-axis controls, 4-12. See also dispensing head
Y
y axis. See xyz-axis controls
Z
z axis. See xyz-axis controls