Instruction Manual

System Specifications 8-1
8 System Specifications
Drive System
X- and Y-Axis Speed 508 mm/sec (20 in/sec.
X- and Y-Axis Control: Brushless DC stepper motor
Z-Axis Speed: 203 mm/sec (8 in/sec)
System Repeatability: +0.025 in. (+0.001 in.)
System Resolution: +0.025 in. (+0.001 in.)
Placement Accuracy +0.13 mm (0.005 in.)
Computer Pentium-based PC
Dispensing Area, Single 432 x 356 mm (17 x 14 in.)
Dispensing Area, Dual 292 x 340 mm (11.5 x 13.4 in.)
Software Fluidmove for Windows
Heated Vacuum Tooling Plate
Size: 457 x 356 mm (18 x 14 in.)
Temperature Range: Ambient to 120
o
C with +5
o
C uniformity
Vacuum: Max 95 kPa (28 in Hg)
4.21/sec (9 SCFM)
Needle Sensor
Refer to Section 12 for specifications.
Options
Digital Scale
Dual-Action Dispensing Head
Heater Controller, Single Channel
Heater Controller, 2-Channel
Heater Controller, 4-Channel
Height Sensor
Hour Meter
Light Beacon
Low Air Pressure Sensor
Needle Heater
Vision System