Manualshelf

Instruction Manual

ManualsBrandsNordson ASYMTEK ManualsEquipmentCentury Series C-720 - Operations Manual
71727374757677787980
Operation 4-35
6. Press the INDEX on the HT-2000 Temperature Controller to record the value and return
to the main display.
?
NOTE
The Set Value (SV) indicates the desired temperature. The Process
Value (PV) indicates the actual temperature of the heating element
underneath the Tooling Plate.
7. To turn the HT-2000 Temperature Controller to OFF, press the switch to OFF
OFFOFF
OFF (0
00
0).
WARNING!
The Vacuum Heated Tooling Plate can get very hot and
remain hot for an hour after being turned to OFF. Never touch
it while the system is ON or after it has been turned off before
it has cooled off.