Instruction Manual

Operation 4-13
Table 4-4 Motion Control Functions (Continued)
Button/Indicator Function
DISPENSER
CONVEYOR
X/Y-Axis Controls (left/right, front/rear) and Conveyor
Controls (conveyor belt, board clamp mechanism
Press DISPENSER to control the X/Y motion of the
dispensing head:
• The left and right arrows move the dispensing head
to the left or right (X-Axis)
• The up and down arrows move the dispensing head
to the rear and front of the dispensing area (Y-Axis)
• Click and release a single arrow to move dispense
head 1mm (0.001 inches)
• Click and hold a single arrow to move the dispensing
head at 25.4 mm/sec (1 in/sec)
• Click and hold a double arrow to move the dispensing
head at 50-75 mm/sec (2-3 in/sec)
CONVEYOR control not applicable to the basic C-720
system configuration.