Instruction Manual

18-2 Index
I
integrated safety systems, 3-6
interior light, 2-6
interlock, 3-6–3-7; key, 4-14
L
levelers, 2-6
lifting precautions,
3-14
light beacon, 2-6, 3-7, 4-16; color code, 4-17
light ring, 9-5, 9-15
light ring card, 9-2
light source, 9-11
light, interior, 2-6
locking out power, 3-11
low air pressure sensor, 16-5, 2-11; adjusting set point,
16-6
lower cabinet,
2-4
M
main air inlet, 2-11
main air pressure, 4-19; adjusting, 4-19; gauge and
regulator, 2-11
main power cable, 2-11
main power circuit breaker,
2-9, 3-10
main power inlet, 3-10
main power switch, 2-12
maintenance, 7-1; heated vacuum tooling plate, 7-6;
purge boot, 7-4; system, 7-2; water trap, 7-3
manual conventions, iii
manuals: supplied, 1-1; when to use, 1-2
MSDS, 3-1
N
needle heater, 2-6, 11-1; adjustment, 11-10; heating
element compatibility, 11-2; heating elements, 11-7;
operation, 11-9; thermocouples,
11-7;
troubleshooting, 11-14
needle location, 12-6
needle sensor, 2-6, 12-1; cleaning, 12-7; load cell, 12-
2; NS Series, 12-2; NS Series,
12-2; NSZ Series, 12-
2; NSZ Series,
12-1; operation, 12-6; setup, 12-3;
specifications, 12-8; troubleshooting, 12-7
noise, 8-2
O
operation: AV-700, 9-3; computer, 4-8; control panel,
4-11–4-15; detailed, 4-2; dispenser, 4-5; height
sensor, 10-11; needle heater, 11-9; needle sensor,
12-6; Opto I/O, 16-2; theory of, 4-1
options, 2-1
Opto I/O: operation, 16-2
P
pattern recognition, 9-1, 9-11
PAUSE button, 4-11
pneumatic lines, 4-20
power, 8-2
power switch, 2-7
power switches, 4-10
pressure: maximum, 13-7
pump configuration, 13-6
pump positions, 13-1
pump spacing,
13-8, 13-9
purge boot, 7-4; close-up, 7-5; colors and sizes, 7-4;
replacement, 7-4
purge station, 2-7
R
rear view, 2-9; close-up, 2-10; features, 2-11; safety
warning labels, 3-5
regulator: valve pressure,
4-23
regulators, 4-18
relief valve, high air pressure, 3-11
S
safety interlock system, 2-7, 3-6–3-7; colors, 4-17
safety precautions: earthquake, 3-13; electrical power,
3-10; heated vacuum tooling plate, 3-12; high air
pressure relief valve, 3-11; lifting,
3-14; lockout, 3-
11; operator, 3-1; system, 3-2; warning labels, 3-3
safety warning labels,
3-4, 3-5
sensors: height, 2-6; low air pressure, 2-11; needle, 2-6
service panel, 2-12
setup: dual action dispensing head, 13-5; needle sensor,
12-3
shipping weight, 8-2
shroud, 2-12
shutdown, 5-4; emergency, 3-8, 5-4; end of shift, 5-5;
production, 5-5
shutdown, emergency, 2-5
software configuration, 13-6
special options: digital scale, 16-8; expanded Opto I/O,
16-1; hour meter, 16-7; low air pressure sensor, 16-5
specifications, 8-1,
13-9; dual action dispensing head,
13-9; needle sensor, 12-8; temperature controller,
11-14
speed control, 4-15
START button,
4-11
startup, 5-1; production, 5-2
STOP button,
4-11
substrate height, 9-9
substrate height limits,
13-9
supplies: cleaning, 4-36; maintenance, 7-7
syringe, 2-7
T
t-bar regulator, 4-19
TEACH button, 4-12
temperature controller, 2-7,
4-32; 4-channel, 4-32;
autotune, 11-13; changing the display, 11-11; four-
channel (4-channel), 4-2; HT-1000,
4-31, 11-1, 11-
5; HT-2000,
4-31, 11-5; installation, 11-5; PID
values, 11-12; PID values, 11-12; setting
temperature, 11-10; specifications, 11-14;
troubleshooting, 11-14