Instruction Manual

Dual-Action Dispensing Head 13-1
13 Dual-Action Dispensing Head
Overview
The Dual-Action Dispensing Head allows you to mount and independently operate almost
any combination of two valves or fluid pumps for applications needing two different fluids.
The left dispensing head operates like standard Asymtek single dispensing heads. The right
dispensing head is a toggle head, capable of rapid up and down motion.
Figure 13-1 and Figure 13-2 show two attached fluid pumps mounted on a dispensing
system. Figure 13-3 shows a system with fluid pumps detached. The left side of the bracket
holds the first fluid pump (Valve 1) and a Height Sensor. The right side toggle head holds
another the second fluid pump (Valve 2).
The second fluid pump mounted on the toggle head is engaged for dispensing and
disengaged when not in use. There is a 13 mm (0.5 in) height difference between the needle
tips of the two fluid pumps when one pump is dispensing.
Programming in FMW
Contact Asymtek Technical Support for information on how to create FMW dispensing
programs using the Dual-Action Dispensing Head.