Instruction Manual

1-2 Getting Started
Which Manuals to Use
Below is a guide for when to use each manual.
For Installation or Upgrading
To install, reinstall, or upgrade components of your system, see the Century Series
Installation Manual. This manual may also be packaged in the Century Series Service
Manual, if available.
After Installation
After Asymtek Technical Support installs your system, see the Century Series Operations
Manual for operator information such as the system description, option descriptions, safety,
startup/shutdown, troubleshooting, and operator level maintenance. The Century Series
Operations Manual is for operators, process engineers, programmers and service
technicians.
For Programming
For software and application training, see the exercises and tutorials in the Fluidmove
Installation and User Guide. Tutorials are also available through online Help.
For Upgrading Software
To reinstall or upgrade software, see the Century Series Installation Manual or any
documentation accompanying the upgrade diskettes.
For Production
For general reference, see the Century Series Operations Manual.
For Troubleshooting
To resolve system difficulties, see Section 6 – Troubleshooting in the Century Series
Operations Manual. Service technicians should see the Century Series Service Manual, if
available.
For Maintenance and Service
For routine maintenance procedures, see Section 7 – Maintenance in the Century Series
Operations Manual. For more extensive maintenance procedures, service technicians should
see the Century Series Service Manual, if available.