User Manual

7-2 Maintenance
System Maintenance
Table 7-1 System Maintenance
Maintenance Procedure
Recommended
Frequency
Instructions
1. Clean purge boot and
purge lid
Daily
a. Remove the purge station lid (see Figure
7-2).
b. Clean the boot and lid with a small bottle
brush and the solvent recommended by the
adhesive manufacturer (see MSDS).
2. Replace cup Daily
a. Remove the purge station lid.
b. Remove the plastic cup.
c. Replace with clean cup.
d. Put the lid back on.
3. Clean Control Panel Weekly
a. Turn OFF the Main Power Circuit Breaker
at the rear of the system.
b. Using isopropyl alcohol (IPA), clean the
Control Panel.
4. Clean doors and side
panels
Weekly
Using isopropyl alcohol (IPA), clean the doors
and side panels.
5. Clean miscellaneous
surfaces
Weekly
• For damp spills, wipe with a dry, soft rag.
• For dried spills, clean with isopropyl alcohol
(IPA).
6. Empty water trap Weekly See Emptying the Water Trap on page 7-3.
7. Replace purge boot Biweekly See Replacing the Purge Boot on page 7-4.