User Manual

4-24 Operation
Gauges and Regulators
The C-718SMT has four types of gauges and regulators:
• Main Air
• Fluid
• Valve
• Conveyor
WARNING! To reach inside the Century Series system front doors or through
the light curtain, you must fully understand the related Safety
Interlock and DISPENSER STATUS indicators (see Table 4-6 and
Table 4-8).
The fluid and valve regulator controls are black knobs extending down from the roof of the
dispensing area. To reach them you must open the front doors or reach through the light
curtain (if installed) where they are located just behind the front hood (see Figure 2-1: Front
View or Figure 2-2: Dispensing Area). The Main Air and conveyor regulator controls are
located at the rear of the system (see Figure 4-9). See detailed adjustment instructions
following descriptions of the gauge and the regulator.