User Manual

Operation 4-13

Table 4-5 Dispensing Status Control Functions

Button/Indicator Function

RESET

CONVEYOR

STATUS

PAUSE

CONVEYOR STATUS has two buttons. PAUSE halts

the conveyor, and its LED indicates that the Conveyor

has been paused. Press PAUSE to resume conveyor

movement.

Press RESET to clear the controller after a fault

condition has occurred.

INTERLOCK

RECOVERY

INTERLOCK is a key-activated safety feature that

prevents the conveyor and the dispensing head from

moving while the access doors are open. During

dispensing operations, this helps prevent personal

injury or damage to the dispensing system. For more

information on INTERLOCK, see Section 3 – Safety.

RESET

DISPENSER

STATUS

DISPENSER STATUS LEDs are color coded for each

dispensing status condition. For an explanation of the

different status conditions, see Table 4-6.

Press DISPENSER STATUS RESET after the

condition that triggered the red “abort” LED has been

corrected. This will reset the dispenser electronics.

NOTE: After you press the DISPENSER STATUS

RESET button, you must press the FIND HOME

button to re-establish motor references.

(Continued next page)

Program

Paused

Fault

Condition