User Manual

3-10 Safety
Electrical Power
Electrical Power is supplied to the dispensing system through the Main Power Inlet. The
Main Power Cable connects the facility AC power source to the Main Power Inlet located
on the rear of the Century Series system (Figure 3-4).
All personnel working on or around the Century Series system must be
aware of all electrical power supply sources.
WARNING! When performing service or maintenance work on the system, be
sure to lock out power (see “Locking Out Power” on page 3-11).
Failure to do so could cause serious bodily harm to the user
and/or serious damage to the dispensing system.
To turn the Main Power ON (I) or OFF (O), use the Main Power Circuit Breaker located at
the rear of the Century Series system (see Figure 3-4). Turning the Main Power Circuit
Breaker OFF cuts power to all components.
? NOTE Main Power Circuit Breaker can be used for safety shutdown when
operator is positioned behind the system and unable to reach the EMO.
Figure 3-4 Main Power Inlet and Main Power Circuit Breaker
Main Power
Circuit Breaker
Main Power
Inlet