User Manual

2-12 Introduction
Main Air Gauge and Regulator
The Main Air Gauge indicates the air pressure supplied to the dispensing system from the
facility air supply. The Main Air Regulator (T-bar) controls the amount of air supplied. The
recommended setting is 551-620 kPa (80-90 psi).
Main Air Inlet
The Main Air Inlet connects the Century Series system to your facility air supply.
Main Power Cable and Inlet
The Main Power Cable and Main Power Inlet connect the Century Series system to the
facility power supply.
Main Power Circuit Breaker
The Main Power Circuit Breaker controls all electrical power to the entire system including
the dispensing system, computer, monitor, and temperature controller.
Service Panel
The Service Panel located in the lower rear of the cabinet protects the system components
inside the cabinet. The Service Panel should not be removed by the operator.
Service Shroud
The Service Shroud protects the rear connectors. Operators should not remove it.