User Manual

16-2 Index
M
main air inlet, 2-12
main air pressure, 4-25; adjusting, 4-25; gauge and
regulator, 2-12
main power cable, 2-12
main power switch, 2-12, 4-9
maintenance: conveyor, 7-6; system, 7-2
manual conventions, iii
manuals: supplied, 1-1; when to use, 1-2
N
needle heater, 2-7, 12-1; heating elements, 12-8;
thermocouples, 12-8
needle location, 11-4
needle sensor, 2-7, 11-1; cleaning, 11-5; load cell, 11-
2; NS Series, 11-2; NSZ Series, 11-2; operation, 11-
4; specifications, 11-6; troubleshooting, 11-5
noise, 8-2
O
operation: AV-700, 9-3; computer, 4-7; control panel,
4-8–4-10; detailed, 4-2; height sensor, 10-12; needle
heater, 12-10; needle sensor, 11-4; theory of, 4-1
operator startup. See production startup
P
part sensors, 4-22; checking, 6-6; identifying, 7-7
pattern recognition, 9-1, 9-10
PAUSE button, 4-10
pneumatic lines, 4-26
power, 8-2
power switch, 2-8, 4-9
power switches, 4-9
Pre-dispense Zone, 4-22
pressure: maximum, 13-7
production: shutdown, 5-5; startup, 5-3
pump configuration, 13-6
pump positions, 13-1
pump spacing, 13-8, 13-9
purge boot, 7-4
purge station, 2-8
R
rear view: close-up, 2-10; features, 2-11
regulators, 4-24
S
safety interlock system, 2-8, 3-6–3-7; colors, 4-16;
light curtain, 4-17
safety precautions: earthquake, 3-12; electrical power,
3-10; lifting, 3-13; lockout, 3-11; operator, 3-1;
system, 3-2; warning labels, 3-3
sensors: checking, 6-6; height, 2-7; identifying, 7-7;
low air pressure, 2-11; needle, 2-7
service panel, 2-12
shipping weight, 8-2
shroud, 2-12
shutdown: emergency, 3-8; production, 5-5
software configuration, 13-6
Special Options: Hour Meter, 14-7; Low Air Pressure
Sensor, 14-5
specifications, 13-9; needle sensor, 11-6
speed control, 4-14
START button, 4-10
startup, 5-1; production, 5-3
STOP button, 4-10
stop pins, 4-22
substrate: height limits, 13-9
substrate height, 9-8
substrate height limits, 13-9
supplies: cleaning, 4-32
System Specifications, 8-1
T
t-bar regulator, 4-25
TEACH button, 4-11
temperature controller, 2-8; autotune, 12-14; changing
the display, 12-12; HT-1000, 12-1; HT-2000, 12-5;
PID values, 12-13; PID values, 12-13; setting
temperature, 12-11
testing: I/Os, 14-4
theory of operation, 4-1
toggle adjustment, 13-4
toggle control, 13-7
toggle head, 13-1; adjustments, 13-7
toggle speed, 13-8
troubleshooting: AV-2550, 9-12; conveyor, 6-5; height
sensor, 10-13; needle sensor, 11-5
U
Under Board Support, 2-7
Under Board Support Switch, 2-7
V
valve OFF, 4-26
Valve Offsets, 11-3
valve ON, 4-26
valve pressure, 4-29; gauge and regulator, 2-8
VALVE RESET button, 4-14
valve status indicators, 4-14
valve status indictors, 13-7
video card, 9-2
vision system, 2-8, 9-14; adjusting brightness, 9-5;
adjusting focus, 9-5; availability, 9-1; camera
calibrations, 9-12; component height limits, 9-8;
crosshair alignment, 9-2; download, 9-4; field of
view, 9-7, 9-14; focal length, 9-8; operation; AV-
700, 9-3; power requirements, 9-7; specifications;
AV-2550, 9-13; AV-700, 9-7; troubleshooting, 9-6,
9-12
W
warning labels, 3-3
water trap, 7-3