User Manual

Appendix 14-1
14 Appendix
Century Series Options
Asymtek offers a wide range of special options for fine-tuning your dispensing
applications. This section introduces the options currently available for Century Series
systems. For optional accessories available for this and other Asymtek platforms, see the
sections on cross-platform options (9-15).
Expanded Opto-I/O
The Expanded Opto-I/O option for your Century Series system provides access to 24 I/Os.
Century Series systems use 8-bit I/Os for normal operation of all system components.
Expanded Opto-I/O lets you add accessories such as external devices or sensors.
Connectors for Expanded I/O ports A, B and C are located on the I/O Board, which is
under the top cover of the dispenser at the corner of the Electronics Pan nearest the Light
Beacon. Cables from the three 26-pin female D-Sub connectors can be routed over the I/O
Board to exit through a slot at the middle rear of the machine, shown in Figure 14-1. The
same three connectors can be reached from underneath the I/O Board by removing the two
side panels.
Mainboard
Front
I/O Board
Figure 14-1 Top View, Cover Removed; Expanded I/O Connectors
I/O Port C
Cable
Routing
Slot
I/O Port B
I/O Port A