User Manual

12-12 Needle Heater
To set the needle heater temperature:
1. Press
INDEX on the temperature controller front panel until you see
Set Point 1 (
SP1).
2. Using I and J, adjust the temperature in the Set Value (
SV) display to the
desired value.
3. When you reach the desired value, press
ENTER.
4. Press INDEX to record the value and return to the main display.
To change the display to Celsius or Fahrenheit:
1. Press I and
ENTER simultaneously for five seconds.
The display will show
SECr and a number from 1-4.
2. Press
INDEX until UNIT displays.
3. Using I and J, toggle between Fahrenheit and Celsius.
4. Press
ENTER to record the new unit.
5. Press J and
INDEX simultaneously until you see the primary menu.