Quick Operations Owner manual

26 Setup and Operation
Pre-run Setup Routines
A Prompted Setup or Scripted Setup routine should be performed:
• Prior to all production runs
• After a valve has been removed or reinstalled
• After a new needle has been placed on the valve assembly
• After moving or focusing the camera
• After moving or replacing the height sensor probe assembly
• Anytime you are experiencing inaccurate dispensing
" NOTE Refer to the Fluidmove User Guide or Online Help for detailed information.
Prompted Setup
Figure 4-10 Prompted Setup Routine
1
2
Follow Instructions
4
3
5
7
8
6
Repeat Until Done