Quick Operations Owner manual

Component Description 13
Table 3-3 Control Panel Features (continued)
Item No./Name Feature Function
Z AXIS
Z-Axis Controls
Click and release V to move dispense head up/down 1 mm
(0.001 inch).
Click and hold V to move dispense head 25.4 mm/sec
(1 in/sec).
Click and hold
to move dispense head 50-75 mm/sec
(2-3 in/sec).
TEACH
Press to set a desired location on the workpiece using the
Fluidmove software.
FIND
HOME
Two Modes:
1. Press to move the dispensing head to its XYZ home
position and re-establish its “Home” reference
coordinates.
" NOTE Verify the DISPENSER button’s LED is lit before
you press FIND HOME.
2. Press a Z-axis UP button, then press FIND HOME to
move the dispensing head to its Z-axis origin and re-
establish its “Home” reference coordinates.
4
Directional Controls
DISPENSER
CONVEYOR
Dispenser/Conveyor
XY Controls
Enables Conveyor belt X-axis motion controls and
rear rail Y-axis motion controls.
Enables dispensing head X/Y motion controls.
.
Dispensing Head:
Up/Down slow/small increment
Conveyor Rail: Back/Forward slow/small increment
Dispensing Head:
Left/Right slow/small increment
Conveyor Belt: Left/Right slow/small increment
Dispensing Head:
Up/Down fast/large increment
Conveyor Rail:
Back/Forward fast/large increment
Dispensing Head:
Left/Right fast/large increment
Conveyor Belt: Left/Right fast/large increment
" NOTE Press and release for incremental movement.
Press and hold for continuous movement.