Quick Operations Owner manual

12 Component Description
Control Panel
Figure 3-3 Control Panel
Table 3-3 Control Panel Features
Item No./Name Feature Function
1
Fluid Pressure
Gauge
Displays the air pressure level being supplied to the syringe.
Systems equipped with a Dual-Action Dispensing Head have
two gauges.
2
ON and OFF
Buttons
I = Green system ON button.
0 = Gray system OFF button. Shuts down all dispensing system
components except Computer and Monitor.
ABORT
Press to abort a production run. A red LED indicates that the
currently loaded program is discontinued.
Press RESET, then FIND HOME to restart the program. The
red LED turns off.
PAUSE
Press to temporarily stop a production run. A yellow LED
indicates the system is paused.
To resume dispensing, press the button again. The yellow LED
turns off.
3
Program Controls
PROGRAM
0
1
2
3
4
5
6
7
8
9
START
" NOTE Not used if running Fluidmove software.
The LEDs numbered 0-9 indicate dispensing programs that are
saved in the dispensing system memory. Use the up/down
arrows to select the desired dispensing program.
Press START to run the selected program.
7
7 5
4
3
1
2
6 8 1