Manual

Needle Sensor 11-1
11 Needle Sensor
The Needle Sensor can be installed at various locations around the dispensing area,
depending on the model of dispensing system.
There are two types of Needle Sensors currently available. Millennium Series dispensing
systems use either type of Needle Sensor. Century Series and other dispensing systems use
only the NS Series. The NS Series is shown in Figure 11-1. The NSZ Series, which includes
an accessory Load Cell for performing height sense tests, is shown in Figure 11-2.
Figure 11-1 NS Series Needle Sensor
Figure 11-2 NSZ Series Needle Sensor
Needle Slot
LED Indicator
M
arkings used with
H
eight Sensor and
N
eedle Calibration
Place for
Calibration Substrate
N
eedle Slot
LED Indicator
Load Cell