Manual

9-4 Vision Systems
Operation in Download Mode
When using the AV-700 in Download Mode on the dispensing system, the camera and light
are turned ON with the dispensing system. The magnified workpiece image and crosshair
are displayed as a full-screen image on command. Control Panel buttons are used to activate
a program from Download memory. The operator uses the Arrow Buttons on the control
panel to align programmed patterns and teach them to the dispensing system.
To operate the AV-700 in Download Mode in FMDOS:
1. Start the dispensing system.
2. Exit Fluidmove to the DOS prompt.
3. At the prompt on the computer, type
A full screen video will be displayed on the system monitor.
4. Select the downloaded program you want to run.
On 600 Series dispensing systems, choose the number of the program using
Select
on the Dispenser Control Panel.
On Century Series dispensing systems, choose the number of the program
using
Program
on the control panel.
5. Start the download program.
On 600 Series dispensing systems, press
Go
on the Dispenser Control Panel.
On Century Series dispensing systems, press
START
on the control panel.
6. Press
[+]
to change the crosshair color as needed.