Manual

Vision Systems 9-3
Operation Controls
To operate the AV-700 while programming in FMDOS:
1. Start the dispensing system.
2. Start Fluidmove.
3. Install your workpiece in the dispensing area.
4. To teach a dispensing pattern starting point, position the crosshairs over the center
of the point.
5. Press [F9] to toggle between Fluidmove and the fiducial video image display on the
monitor as necessary while programming.
Many FMDOS commands will automatically display the video.
6. Press [Enter].
To operate the AV-700 while programming in FMW:
1. In the FMW Main Window, click on .
2. Follow the on-screen prompts and consult the on-line Help for assistance, if
necessary.