Manual

8-2 System Specifications
Dispensing Area Dimensions*
System NS-Series AV-700 VHP-01 DA-700 Dispensing Area
304 x 304 mm (12 x 12 in.)
X 304 x 273 mm (12 x 10.78 in.)
X 241 x 287 mm (9.50 x 11.33in.)
X X 241 x 256 mm (9.50 x 10.11 in.)
X 259 x 304 mm (10.21 x 12 in.)
X X 259 x 273 mm (10.21 x 10.78 in.)
X X 225 x 304 mm (8.87 x 12 in.)
X X X 225 x 273 mm (8.87 x 10.78 in.)
X 210 x 284 mm (8.27 x 11.21 in.)
X X 210 x 252 mm (8.27 x 9.93 in.)
X X 210 x 221 mm (8.27 x 8.72 in.)
X X 210 x 272 mm (8.27 x 10.73 in.)
X X X 210 x 190 mm (8.27 x 7.44 in.)
X X X 210 x 240 mm (8.27 x 9.45 in.)
X X X 210 x 221 mm (8.27 x 8.72 in.)
C-702
XXXX210 x 190 mm (8.27 x 7.44 in.
449 x 438 mm (17.70 x 17.25 in.)
X 449 x 389 mm (17.70 x 15.33 in.)
X 386 x 421 mm (15.20 x 16.58 in.)
X X 386 x 372 mm (15.20 x 14.66 in.)
X 279 x 317 mm (11 x 12.50 in.)
X X 279 x 317 mm (11 x 12.50 in.)
X X 279 x 317 mm (11 x 12.50 in.)
X X X 279 x 317 mm (11 x 12.50 in.)
X 362 x 438 mm (14.27 x 17.25 in.)
X X 362 x 415 mm (14.27 x 16.35 in.)
X X 362 x 355 mm (14.27 x 13.98 in.)
X X 279 x 317 mm (11 x 12.50 in.)
X X X 362 x 332 mm (14.27 x 13.08 in.)
X X X 279 x 317 mm (11 x 12.50 in.)
X X X 279 x 317 mm (11 x 12.50 in.)
C-708
XXXX279 x 317 mm (11 x 12.50 in.)
X X 457 x 356 mm (18 x 14 in)
C-708 AICE
X X X 356 x 277 mm (14 x 10.9 in)
* Dispensing area dimensions change depending upon the options installed. The following options are
considered in the table above:
NS-Series ------------------------------------- Needle Sensor
AV-700 ----------------------------------------- Vision System
VHP-01 ---------------------------------------- 304 x 304 mm (12” x 12”) Vacuum Heated Tooling Plate
DA-700 ---------------------------------------- Dual-Action Dispensing Head