Manual

4-2 Safety
Safety Warning Labels
To ensure the safety of all personnel, always observe standard safety precautions and
practices. Before using your Century Series system, take a moment to familiarize yourself
with the system safety features and warning labels. There are three different types of
warning labels:
Mechanical
Mechanical warning labels identify features that require special
attention. These features are either moving parts, such as the Dispense
Head, important power supply components, such as the Main Power
Switch, or safety devices, such as the Interlock.
Electrical
Electrical warning labels identify high voltage components. Use
extreme caution when working in or around these areas.
Thermal
Thermal warning labels identify potentially hot components and
surfaces. Use extreme caution when working in or around these areas.
Refer to Figure 4-1 for the location of all warning labels on the Century Series system.
Depending on your particular system, some label locations can vary.
Adhere to all safety warning labels. Failure to comply can result in
serious bodily injury.