Manual

3-12 Operation
Computer Operation
The computer can be left attached to the dispensing system or can be removed if using
FMDOS. You can leave the computer ON between dispensing operations. If using FMW,
the computer must remain attached to the Century Series System. To clear computer system
errors, it may be necessary to reboot the computer. Dispensing will stop automatically if you
reboot or turn off your computer while you are running the dispensing program directly from
the computer.
To reboot the computer:
1. Stop your dispensing program in the dispensing system software.
2. Exit the software.
3. Press the computer Power Switch.
4. Wait 30 seconds.
5. Press the Power Switch again to restart the computer.
Respond to any screen prompts as the computer automatically reboots.
The software automatically reboots.
When restarting the dispensing system software, the system may
perform a Needle Sense and/or a Find Home
.

If you are running a dispensing program from Download, rebooting or
turning OFF the computer will have no effect on a dispensing program in
progress.