Manual

Operation 3-9
Table 3-5 System Status Color Indicators and Conditions
Indicator Color System Status Recovery
RED
ALERT
All motion,
outputs
, valves and motion
controls are disabled.
One of the following conditions exists:
A. Doors open when system is
moving,
Interlock
at
.
B. System is in an abort state.
A. or B.
1. Close doors, or change
Interlock to
.
2. Press SYSTEM RESET.
3. Press FIND HOME.
4. Select the proper Interlock
mode for your application.
5. Restart the program.
YELLOW
CAUTION
One of the following conditions exists:
A. Front doors closed, Interlock at
.
B. Front Doors open when system is
not moving, Interlock at
.
A. Normal condition no
correction needed.
1. Close doors.
2. Select correct Interlock
position for your application.
GREEN
OPERATION
The system is fully operational with the
front doors closed, Interlock at
.
BLUE
USER DEFINED
System needs attention.
Check for operator-programmed
conditions.