Manual

3-8 Operation
Table 3-4 System Status Control Functions
Button/Indicator Function
INTERLOCK
INTERLOCK
RECOVERY
The Safety
Interlock
is a key activated safety feature that
can be used to restrict access to the inside of the
dispensing area. For more information on the Safety
Interlock
, see Section 4 - Safety.
SYSTEM
RESET
SYSTEM
STATUS
SYSTEM STATUS
LED indicators are color coded to
reflect different SYSTEM STATUS conditions. For an
explanation of the different status conditions, see
Table
3-5
.
Press
SYSTEM RESET
after the condition indicated by the
colored LEDs has been corrected.
V1V1
VALVE
STATUS
V2
Valve Status
indicators alert you if valve related problems
occur. V1 is Valve 1. V2 is Valve 2. The LED indicator for
the appropriate valve will turn ON if a problem occurs.
There are two Speed Controls, one for each valve. The
Speed Controls dictate the valve motor speed which affects
the amount of fluid dispensed.
VALVE
RESET
Press the
VALVE RESET
after you have corrected any
problem indicated by the Valve Status indicators.