Manual

Index-2
heating elements, 12-6
setting temperature, 12-8
specifications, 12-12
thermocouples, 12-6
needle location, 11-3, 11-4, 11-7
Needle Sensor, 2-8, 11-1
cleaning, 11-8
load cell, 11-2
NS Series, 11-2
NSZ Series, 11-2
parameters, 11-5
setup, 9-5, 11-4
troubleshooting, 11-8
P
pattern recognition, 9-1, 9-11
Power Entry Module, 2-14
Power Switch, 2-9
Process Value, 12-8, 13-12
programming, 5-5
purge station, 2-9
R
RS-232C, 2-14
S
Safety Interlock, 2-9, 4-4, 4-5
Light Curtain, 13-7
Safety Precautions, 4-1
Set Value, 12-8, 13-12
shroud, 2-12
Special Options
Hour Meter, 13-18
Light Beacon, 13-14
Low Air Pressure Sensor, 13-16
Vacuum Heated Tooling Plate, 13-10
specifications, 8-1
substrate
height changes, 10-4
warped, 10-1
substrate height, 9-9, 9-15
system status indicators
Light Curtain, 13-8
T
Temperature Controller, 12-1, 13-10
AC and DC devices, 12-1
Autotune, 12-11
changing the display, 12-9
Heater Control for Windows, 12-5
Heating Element compatibility, 12-1
HT-1000, 12-1
HT-2000, 12-1
PID values, 12-10
power requirements, 12-12
setting temperature, 12-8
specifications, 12-12
testing
I/Os, 13-6
thermocouples, 12-12
tooling pins, 3-1
TUV, 2-1
V
vacuum control, 13-12
Vacuum Generator, 2-9
Vacuum Heated Tooling Plate, 2-9, 13-10
temperature control, 13-12
vacuum control, 13-12
Vacuum Switch, 2-9
video card, 9-2
Vision System, 2-9
adjusting brightness, 9-6
adjusting focus, 9-5
availability, 9-1
camera, 9-12
camera calibrations, 9-13
component height limits, 9-9, 9-15
crosshair alignment, 9-2
download, 9-4
field of view, 9-8, 9-14
focal length, 9-9, 9-15
light level, 9-12
power requirements, 9-8
programming, 9-3
specifications, 9-8
troubleshooting, 9-7
W
warning labels, 4-2