Manual

13-4 Special Options
To change a port in FMW:
1.
Start FMW.
2.
In the Main Window, click on .
3.
Select from the Configuration menu.
The Serial Ports Setup dialog box opens.
4.
Select the port assignment for each device.
5.
Click on .
To add a port change command to a dispensing program in FMW:
1.
Start FMW.
2.
In the FMW Main Window, click on .
3.
Select .
4.
Open your dispensing program file.
5.
Locate the point in your dispensing program where you want to activate your Port.
6.
Click on on the Program Commands Toolbar.
7.
Insert one of the following ACL commands into your dispensing program.
(to activate Port A)
(to activate Port B)
(to activate Port C)
8.
Click on .
9.
Select from the menu bar.
10.
Select .