Manualshelf

Manual

ManualsBrandsNordson ASYMTEK ManualsEquipmentCentury Series C-708 AICE - Operations Manual
111112113114115116117118119120
Special Options 13-3
To add a port change command to a dispensing program in FMDOS:
1.
Start FMDOS.
2.
Select .
3.
Select from the menu bar.
4.
Select .
5.
Press [Enter].
6.
Press [Enter] again to view a list of all dispensing programs.
7.
Select your dispensing program.
8.
Select .
9.
Press [F2].
10.
Use the arrow keys to locate the desired line in your dispensing program to enter
the ACL Command to change your Port.
11.
Press [Esc].
12.
Select .
13.
Press [Enter].
14.
Select .
You may need to scroll down the menu to find the command.
15.
Press [Enter].
16.
Insert one of the following ACL commands into your dispensing program.
(to activate Port A)
(to activate Port B)
(to activate Port C)
17.
Press [ENTER].
18.
Select .
19.
Select .
You can only access one port at a time. Press
SYSTEM RESET
on
the Control Panel to reset the system and activate Port A.