Manual

1-2 Getting Started
Which Manuals to Use
Below is a guide to when each manual will be most useful to you. The level of the intended
user is also indicated.
For Installation or Upgrading
To install, reinstall or upgrade components of your system, refer to the Installation Manual.
This manual may also be packaged in the Service Manual.
After Installation
After you have installed your system using the Installation, consult this Operations Manual
for other operator information such as system description, option descriptions, safety, start-
up, shutdown and operator level maintenance. This manual is for operators, process
engineers, programmers and service technicians.
When Programming or Upgrading Software
Process engineers should read the Fluidmove User’s Guide (for FMDOS) or the Fluidmove
for Windows User Guide and try the training exercises using the supplied Tutorial Boards. If
you need to reinstall or upgrade software, refer to the Century Series System Installation
Manual or refer to any documentation accompanying the upgrade diskettes.
For Production
It is recommended that you consult this Operations Manual for general reference, and either
the Fluidmove User’s Guide or the Fluidmove for Windows User Guide for training.
For Maintenance, Troubleshooting and Service
Operators should refer to Section 6
−
Troubleshooting in this manual if they encounter
difficulty with the system. Service technicians should refer to the Troubleshooting section of
the Service Manual, if available.